|
|
Milling machine
Homola, Stanislav ; Vetiška, Jan (referee) ; Marada, Tomáš (advisor)
This goal of the diploma thesis is to design, to construct and write control program for CNC milling machine designed for machining aluminum, wood and plastic. Entire structure of machine is designed and made of steel. The main table consists of an aluminum plate and aluminum structural profiles. Spindle of milling machine is a high speed motor from ATAS a.s. company. Milling machine is controlled by the program made in TwinCAT environment from Beckhoff Automation GmbH & Co. KG.
|
|
|
Electronics and CNC milling machine control
Tmej, Tomáš ; Zuth, Daniel (referee) ; Marada, Tomáš (advisor)
The diploma thesis focuses on the electronics design of a hobby CNC milling machine. There are analysed and described the individual electronic parts and components related to this problematic. Three electronics suggestions are made, these suggestions are compared. Then, one of these variants is selected and implemented. Next, is created a relevant PLC program to control the CNC milling machine with visualization for easy control.
|
|
| |
|
|
NC control system on Beckhoff platform
Jelínek, Pavel ; Bradáč, František (referee) ; Vetiška, Jan (advisor)
This thesis deals with a creation of a control system of 3-axis milling machine. The beginning of the thesis is dedicated to the general description of the problematic of the numerically controlled machines and the technologies used in this branch. The next chapter describes mechanical and electronical adjustments of the machine. Following chapters are dedicated to the creation of PLC program and HMI using the TwinCAT software. In conclusion, this thesis deals with commissioning of the machine, measuring its geometrical accuracy and testing.
|
|
|
Milling machine CNC control
Krejčí, Jan ; Benešl, Tomáš (referee) ; Bradáč, Zdeněk (advisor)
This diploma thesis deals with rebuild of manual drill-mill machine BF20L into CNC mill machine, 3D model of that and eventual control using PLC. All axes are powered by stepper motors, with encoders, connected to control cards and industrial computer from company Beckhoff. For this control is made full switchboard, supplemented by electrical wiring diagram. Program control along with visualization is made in software TwinCAT 3. Drill-mill machine can be controlled manually or automatically by program.
|
|
|
Modification of 3D milling machine to 3D printer
Halamíček, Lukáš ; Vetiška, Jan (referee) ; Bradáč, František (advisor)
This thesis deals with rebuilding of engraving machine to 3D printer. In the first part it describes possible 3D printing technologies and its utilizations in rebuilding. In the next section suitable parts for reconstruction are chosen and described. Then the controlling of heating bed, hot end and filament feed is realized by using software TwinCAT by company Beckhoff. Functional 3D printer should be result of this thesis.
|
|
| |
|
|
SCARA control system
Bittner, Jakub ; Burian, František (referee) ; Benešl, Tomáš (advisor)
This thesis shows the process of restoring a SCARA type robot, which has had its controller destroyed. The signal cables as well as the power ones were rewired so that it would be able to create new control system for robot arm. New control system is created using devices from Beckhoff company. For that identification of motors is required. After that PC control is programmend to control every single axis of manipulator, with this program vizualizations of controll elements are created. In the end linear interpolation of movement between points is implemented.
|
|
|
3D engraving milling machine
Bosák, Daniel ; Vetiška, Jan (referee) ; Bradáč, František (advisor)
This thesis deals with rebuilding of a laboratory manipulator to 3D engraving machine. First part of the thesis describes the engraving technology and lists the most common types of engraving machines. Next, the initial state of the machine is analysed and modifications of mechanical and electrical equipment are suggested. Design, realisation of a control system and human machine interface are described. The Beckhoff TwinCAT programming environment is used. The last part of the thesis deals with practical realisation and commissioning of the machine. The results of the thesis can be used as an addition for lessons of Automation of Production Machines.
|
|
|
The modernization of control system of milling machine FNG
Holas, Jiří ; Vetiška, Jan (referee) ; Bradáč, František (advisor)
This thesis deals with a proposal modernisation of control and electroinstalation of the milling machine FNG 32. The thesis is divided into several sections: The first section is dedicated to the research of the milling machine and the description of its current condition. The second section deals with possible options of retrofitting and with the components.The third section includes the technical and economical evaluation and the selection of the solution. In the next section, the selected components are described and an electronic documentation of the machine has been created in EPLAN. In the last section, a proposal of control of the milling machine has been created with the help of the TwinCAT development environment provided by Beckhoff company.
|
guest ::
